Archive for April, 2010

50mm / 2 inch Aluminium Bolt on wheel spacers

Are you looking to space out the wheels on your speedway car?
Clarko now has 50mm / 2 inch wide bolt on wheel spacers to solve that problem!!
Rather then have many spacers, and extra long studs, which can and has lead to failure when racing, Clarko now has 50mm / 2 inch wide bolt on wheel spacers.

Benefits
- very easy to install (please watch video below)
- made from solid billet aluminium for strength
- have shipped straight to your front door for convenience

These spacers are avaliable in
- Ford 5 stud to Ford 5 stud
- Commodore  to Commodore

Wheel stud information
Wheel studs are not provided, click on the link below for stud info
For Ford click here
For Holden Click here
or you can use ARP Part # 100-7703 but you will need to drill out the holes to suit the knurl

I Guarantee you!  That installing this bolt on wheel spacer will offset your wheel and solve that problem you have

To view OR order your  50mm / 2 inch bolt on wheel spacers and other bolt on wheels spacers

CLICK HERE

How to install the bolt on wheel spacers ?

Contact web www.clarkosperformance.com

For all email inquires click HERE

Steve Conway testing out his 18 year old LJ  Holden Torana at Brisbane Speedway
Steve uses some of Clarkos Performance race gear, like Beadlocks, weld of fittings, pushlock fittings, and some other parts, to view Clarkos Performance parts

CLICK HERE

Wingless Sprint car CRANK ADAPTURE (Lightest in Australia)

Australias Lightest sprint car crank adapture has been designed/ tested/ proven to give, you, the racer the advantage on your competators and a no hassle instulation.

I personaly have bolted up and used the other crank adaptures on the market, so i do know first hand what you are experiening. Trying to do up those nuts with no room to swing that spanner, having to do them up in a pattern so as the nuts dont bottom out on the back of the adapture, taking forever to fit the dam adapture, and taking bark off your fingers in the mean time, plus i have seen realy life cases of where other adptures have come loose simply because you couldn’ tighten up the bolts properly, so i know exactly what expierences you are having, as from being there and experiencing it myself.

Because i have seen and experienced the pain, frustration and some results that you have had with some crank adaptures, Clarko and a well know wingless sprint car racer decided enough was enough and decided to upgrade this wingless crank adapture, This wingless sprint car racer uses Clarkos crank adapture on all the engines he recos and sends around Australia,

Why Clarkos adapture?
- Have the lighest crank adapture on the Aussie & New Zealand Market
- Use socket head cap screws and have access for a inhex socket so you can torgue up the bolts
- Able to install in minutes
- No more frustration when installing
- The first production run were sold in hours of being avaliable
- Have market confedience
Now that you know the Clarkos wingless sprint crank adapture is avalaible with all these extra features, Designed, tested, race proven, and can be found on race winning wingless sprint cars throught Australia and now haveing that extra advantage on your competators of being the lighest on the market with all the problems now eliminated, and being snaped up with in hours of being avaliable in the market place,
Why were Clarkos Sprint car wingless CRANK ADAPTURES almost sold out in just hours of being avaliable?

Clarko also has a range on Wingless Sprint race parts
- Methanol Injectors
- Crank adapters
- Engine mounts
- Aluminum Pulleys
- Steering wheels
- Power steering brackets
- coil mount
- top flange for throttle body
- Aluminum ans steel sumps
and a whole lot more
CLICK HERE TO VIEW OTHER WINGLESS PRODUCTS

For all email inquires click HERE